63
Configuring Your Onyx EZ
Find Available FM Channels in Your Area
Before attempting any of the procedures below, you should park your vehicle
in a safe location . Do not attempt to set up your FM channels or any Onyx EZ
function while driving .
Power
Connect allows you to listen to SiriusXM audio through your vehicle’s FM
radio . You will first need to find an available FM channel, which is a channel that
is not being used by an FM radio station in your area . When you tune your FM
radio to an available channel, you should only hear static or silence – not talk or
music .
Once you have found an available channel, you need to tune Onyx EZ’s built-in
transmitter to the same channel to receive XM audio through your vehicle’s
radio .
To find an available FM channel:
• Manually tune through your local FM channels
1 .
Manually tune through your local FM channels on your vehicle’s FM
radio . Turn on your vehicle’s FM radio . Start at 88 .1 and use the ‘Manual’
tune function on your vehicle’s FM radio to tune through each FM
channel one-by-one (88 .1 followed by 88 .3 etc .) to locate channels
that aren’t being used by a local FM radio station . Write down each FM
channel that has only static or silence on it, until you reach 107 .9 . Once
you have created your list of available FM channels, you will need to find
the one that provides the best match for Onyx EZ .
2 .
Tune Onyx EZ to a favourite XM channel (or to channel 1, if it’s not yet
activated) . Pick the first FM channel on your list and tune the FM radio
to that channel . Then tune the Onyx EZ to the same FM channel . (Refer
to “Set and Select an FM Channel” on page 65 .) You should hear the
XM channel through your vehicle’s radio . If you are satisfied with the
