20
Onyx EZR with Vehicle Kit User Guide
Option 1: Aux In Cable Installation Instructions
1.
Plug one end of the Aux In Cable into the
green AUDIO
connector on the dock .
2.
Plug the other end into the auxiliary input jack of your vehicle’s stereo
system .
3.
If you are using the vent mounting method, attach the Vent Mount to the
vehicle vent .
4.
Insert your Onyx EZR into the dock .
5.
Power on your Onyx EZR by pressing the
Power button
.
6.
Be sure the vehicle is outside and the antenna has a clear view of the
sky . Verify that you are receiving the XM signal . There should be at
least two bars on the lower left corner of the main display screen that
denotes antenna signal strength . You can also press
Menu
and then
press
down
to scroll to and highlight
Signal Indicator
. Press the
Select button
. The Satellite and Terrestrial bars show the strength of
the signal being received . If the signal reception is good, press and
hold
Menu
to return to the main display screen .
7.
Ensure Onyx EZR is tuned to channel 1, the XM Preview channel . Upon
power up, Onyx EZR should tune to channel 1 by default, when it’s not
yet activated . If it’s not on channel 1, refer to “Tuning to a Channel” on
page 28 to learn about how to tune a channel .
8.
Turn on your vehicle’s stereo system . Set it to play from the auxiliary
input source . You should hear XM channel 1 through your vehicle’s
stereo system . You are now ready to activate your Onyx EZR .
9.
Go back to “Step 2: Install the Dash or Vent Mount” on page 9
and finish installing the Dash or Vent Mount . Then the installation is
complete .
10.
The audio level output of Onyx EZR
can be increased or decreased as necessary to match the
audio levels of other sources in your vehicle . Refer to “Audio Level” on page 45 .
If the signal reception is good, showing at least two bars in the lower left corner of the display, but
there is no XM audio, be sure the vehicle’s stereo system is set to the auxiliary input source (step 8) .
Also be sure that the audio level is set high enough to be heard (step 10) . Refer to “Troubleshooting”
on page 49 for additional help .
Signal Indicator
Press Menu to exit
Satellite
-
+
Terrestrial
-
+
1
866-635-2349
siriusxm.com
XM Preview
1
2
3
4
5
6
7
8
9
0
Installation
AUDIO
ANT
PWR
FM