22
Onyx EZR with Vehicle Kit User Guide
Option 3:
Power
Connect Installation Instructions
1.
If you are using the vent mounting method, attach the Vent Mount to the
vehicle vent .
2.
Insert your Onyx EZR into the dock .
3.
Power on your Onyx EZR by pressing the
Power button
.
4.
Be sure the vehicle is outside and the antenna has a clear view of the sky .
Verify that you are receiving the XM signal . There should be at least
two bars in the lower left corner of the main display screen that
denotes antenna signal strength . You can also press
Menu
and then
press
to scroll to and highlight
Signal Indicator
. Press the
Select
button
. The Satellite and Terrestrial bars show the strength of the
signal being received . If the signal reception is good, press and hold
Menu
to return to the main display screen .
5.
You’ll first need to find an available FM channel . An available FM
channel is one that’s not being used by an FM radio station in your
area . When you tune your FM radio to an available channel, you
should only hear static or silence – not talk or music . We recommend
one of the following methods to find an available FM channel:
a .
Use the SiriusXM FM Channel Finder at
www .siriusxm .com/
fmchannel
. Go to the website and enter your zip code . The
Channel Finder will suggest a list of available FM channels in your
area . For convenience, write down or print out the list .
OR
b .
Manually tune through your local FM channels on your vehicle’s
FM radio . Locate and create a list of channels that aren’t being
used by any FM radio station . Write down the list . Once you have
created your list of available FM channels, you will need to find the
one that provides the best match for Onyx EZR .
TIP!
You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to tune
through every FM channel one-by-one . Turn on your vehicle’s FM radio . Start at 88 .1 and
use the ‘Manual’ tune function on your vehicle’s FM radio to tune through each FM channel
one-by-one (88 .1 followed by 88 .3 etc .) to locate channels that aren’t being used by a local
FM radio station . Write down each FM channel that has only static or silence on it, until
you reach 107 .9 .
6.
Ensure Onyx EZR is tuned to channel 1, the XM Preview channel . Upon power up, Onyx EZR
should tune to channel 1 by default, when it’s not yet activated . If it’s not on channel 1, refer to
“Tuning to a Channel” on page 28 to learn about how to tune a channel .
7.
Pick the first FM channel on your list from step 5 . Turn on your vehicle’s FM radio (if you have
not already done so) and tune it to this FM channel .
8.
Set your Onyx EZR to transmit on the same FM channel that you have selected in step 7:
i .
Press
Menu
.
ii .
Press
to scroll to and highlight
FM Settings
and press the
Select button
.
iii . FM Channels
will be highlighted .
If it is not highlighted, press
to scroll to and highlight
FM
Channels
. Press the
Select button
.
Installation
Signal Indicator
Press Menu to exit
Satellite
-
+
Terrestrial
-
+
1
866-635-2349
siriusxm.com
XM Preview
1
2
3
4
5
6
7
8
9
0