50
Onyx EZR with Vehicle Kit User Guide
If this happens:
Try this:
Audio fades or has static when
listening
•
Check all cables for a firm and secure connection .
•
If you are using
Power
Connect to listen via your vehicle’s FM
radio, and the problem persists, it most likely is interference from
another commercial or broadcast FM station . You will need to
find an unused or available FM channel in your area . Refer to
“Find Available FM Channels in Your Area” on page 38 .
•
If you are using
Power
Connect, and you cannot solve the audio
problem, try connecting the audio using the Aux In Cable or a
Cassette Adapter . (Refer to page 20 and page 21 .) If you
cannot use those solutions, consider using an FM Direct Adapter .
(Refer to page 23 .)
No audio when using
Power
Connect or FMDA
•
Check that your Onyx EZR and your vehicle’s FM radio are tuned
to the same FM channel .
•
For
Power
Connect, ensure you are using the
Power
Connect
Vehicle Dock and
Power
Connect Power Adapter .
•
If you are using the Vehicle Dock that came with the Universal
Xpress Car Kit, ensure that the FM Transmitter in Onyx EZR is
turned On .
No song title or artist name is
displayed
•
The information may not be available or updates may be in
progress .
Traffic and Weather channels
sound different from other
channels
•
These channels use a different audio technology than other
channels so they often sound different from other channels .
The demo is playing
•
Your Magnetic Mount Antenna is not connected or you are
not receiving the signal . Check that the antenna is connected
properly and is not obstructed .
•
Press and hold the
Select button
for 10 seconds to exit Demo
Mode .
•
You can disable Demo Mode . Refer to “Demo Mode” on page
47 .
Troubleshooting
