22
Roady BT User Guide
Method A: Bluetooth pairing from Roady BT to the radio/headunit
1.
Temporarily turn off Bluetooth capability in any devices that you may have with you during
the installation, such as a
cellphone
, to avoid other devices connecting to the vehicle’s radio/
headunit instead of Roady BT .
2.
Turn on the vehicle’s radio/headunit and place it in Bluetooth pairing mode . Refer to
the vehicle owner’s manual for instructions on how to do this .
3.
Press
Menu
on Roady BT and then, press to highlight
Audio Settings
and press
the
Select button
.
4.
Audio Output
will be highlighted . Press the
Select button
until
Bluetooth
is
shown as the selected audio output, and then wait a moment while Bluetooth
audio is enabled .
5.
Press to highlight
Bluetooth Settings
and press the
Select button
.
6.
Highlight
Add New Bluetooth Device
and press the
Select button
.
7.
The
Pair Bluetooth Device
message is displayed . Verify that the vehicle’s radio/headunit is on, is
discoverable and in pairing mode and press the
Select button
to continue .
8.
Wait as Roady BT searches for discoverable Bluetooth devices . When the vehicle’s radio/headunit
is shown in the list, press to highlight the name and press the
Select button
. (If you don’t know
the Bluetooth name of the radio/headunit, refer to the vehicle owner’s manual for the name .)
Installation