9
7.3 VIDEO SETUP
TV Standard:
Select the output TV video format (NTSC / PAL).
NTSC Active Output
：
Select the output mode. (HDMI/ SD Video/ VGA/ HD Y.Pb.Pr)
You can also press directly the “TV MODE” button on the remote
control to select output mode.
Aspecl-ratio
：
Select TV mode 4:3 or 16:9.
HDMI
：
Select the HDMI output resolution among 480i / 480p/ 720p / 1080i/ 1080p.
Select the “Auto EDID”, the SIRKOM SRK-1080PW-A Player will scan the
display device connected and set the correct resolution automatically.
SD Video
：
Select the SD output mode. (“Video/ S-Video” or “Y.Cb.Cr”)
VGA 60Hz
：
Select the VGA output resolution.
(640*480 / 800*600/ 1024*768/ 1280*1024/ 1360*768)
HD Y.Pb.Pr 60Hz
：
Select the Y.Pb.Pr output resolution among 480p / 720p / 1080i.
7.4 OTHER SETUP
Play OSD Display
：
Enable/ disable the OSD display.
Auto Play
-
Movies
：
Auto play movie files on the CF card after power on.
- Pictures
：
Auto play picture files on the CF card after power on. (slideshow function)
- Off
：
Turn off the Auto Play function.
SlideShow Interval:
Set the time each photo is shown to 10, 15, 30 or 60 seconds.
SPDIF Out
：
Supports Analog / DPCM audio output.
Speakers Out
：
Supports
2 channel amplifier output.
Lock Remote Controller
：
Enable/ disable the auto key lock function. (The SRK-1080PW-A
Player will auto lock when there is no further input for 1 minute.)
10
7.4 OTHER SETUP (continued)
Lock Password Setup
：
Press the “Enter” button to open the “Set Password” window. Enter
the password with numeric buttons and press the “Enter” button to save the new password
(The default password: 123).
Export Setting File
：
Press the “Enter” button to export the configuration value to the CF
card.
z
Copy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open
the file, and you can see all the configuration value of SRK-1080PW-A Player.
z
You can modify directly the configuration value on your PC.
Example.
[NETWORK] RJ45 Options:Diasble,RJ45,WiFi
“RJ45”
is the current setting, you can modify directly to
“WiFi”
(Disable, RJ45 and WiFi
are the other settings that you can change).
z
Copy the completed file “HDPlayerSetting.txt” from PC to CF card. Insert the CF card to
the SRK-1080PW-A Player, the SRK-1080PW-A Player will apply the new settings
automatically.
Play Button
：
Only for used with play buttons. The SIRKOM SRK-1080PW-A Player
supports two options (Repeat Default / Repeat All) when the demo file finishes playing.
