6
8. Technical data
Technical data
Power supply:
USB DC 5V 2A
Protection class:
IP22
Operating temperature:
0°C to +50°C
Definition
Diameter
D
(mm)
Length
L
(mm)
Torque
(Nm)
Rotational
speed
(U/min)
Power
input
(mA)
Weight
(g)
ERBS25LE
26
490
1,1
28
940
435
9. Bug fixing
Problem
Possible cause
Solution
Drive does not run
Battery weak
Charge the drive via the mains
connection on the motor head with
the charger.
Remote controller without
function
Change to a new battery.
Transmitter is not set up
Establish the connection between the
motor and the transmitter (see 4.2).
Drive is very slow,
even with charged
battery
Incorrect installation
Make sure that the shaft, materials
and drive can move freely.
Overloading
Check the loaded weight.
Drive stops in-
between both end
positions
Adapter or roller capsule
not positioned correctly
Check that the adapter is correctly
seated on the groove provided in the
crown and, if necessary, screw the
roller capsule into the shaft with a
locking screw.
The end position
changes marginally
Fabric changes due to
temperature differences
Reset end position (see 5).
10. Warranty conditions
SIRO Antriebs- und Steuerungstechnik offers a 2-year warranty on new drives that have been
professionally installed and properly operated in accordance with the installation instructions.
The warranty covers all design faults, material defects and manufacturing faults.
Any defects occurring within the warranty period will be remedied by SIRO free of charge by
supplying an equivalent or new product. Replacement delivery for warranty reasons does not
result in general extensions of the original warranty period.
Any claims for compensation beyond this are excluded.
