15 Preparing Chair and Water Unit
Sirona Dental Systems GmbH
59 58 470 D 3370
20
D 3370.031.01.10.02
1.
Remove the transport protection tape.
2.
Undo two screws of fuse box cover and remove cover.
3.
Undo and remove three screws of the cable holder on
the distributor box.
4.
Check to see if the hoses are arranged as shown in the
drawing. Remove protective bag from connector and
cable ties
K
.
5.
Check to make sure that the electrical leads have been
routed through the other opening in the stand and
through the cable holders.
6.
Remove both covers carefully. To do this, place a
screwdriver in recess
A
to carefully prize the two hous-
ing covers apart.
7.
Grease O-rings and insert tumbler faucet up to the stop.
15 Preparing Chair and Water Unit
Grease SYNTHESO PRO AA2
1.
2.
3.
4.
5.
6.
7.
A
K
