62 14 972 D 3507
D 3507
.
031.01.07
.
02 11.2010
19
Sirona Dental Systems GmbH
Installation
Installation Instructions HELIODENT
PLUS
Installing the support arm and scissor arm
båÖäáëÜ
5.2
Installing the support arm and scissor arm
5.2.1
Preparation
➢ Enter the serial number of the scissor arm into the Installation Report/
Warranty Passport.
5.2.2
Installing the support arm
1. Remove support arm (P2) from the packaging.
2. Insert the support arm into the bearing (U).
3. After insertion, secure the support arm with a retaining ring (W) to
prevent it from getting lifted out.
4. Unlock the housing (A) by pressing the housing shells together at
position S.
5. Remove the housing (A) from the support arm.
6. Unlock the housing (B) by pressing the housing shells together at
position T.
7. Remove the housing (B) from the support arm.
P2
NOTICE
Risk of damaging housing parts
It is essential that you use only your hands when removing the housing
shells (A and B).
The surfaces of the housing shells will be damaged if you use any tools
such as screwdrivers, etc.
T
S
