5 Operating
Sirona Dental Systems GmbH
60 81 967 D 3350
12
D 3350201.02.08.02
5.1.2
Selecting the radiographic technique
Digital
You can switch back and forth between the conventional
and the digital radiographic technique by briefly holding
down the time selector (5).
The resulting reduction in the exposure time will then be
displayed.
If you are working with a digital radiographic system (e.g.
SIDEXIS
), the
Digital
mode indicator lamp (6) on the
unit
must
be illuminated.
Use an X-ray field limitation for the digital radiographic
technique.
NOTE
i
The recommended exposure times apply to full-size
and universal SIDEXIS intraoral radiographic sen-
sors.
Other values apply when using radiographic sen-
sors from other manufacturers.
Conventional
If you want to take conventional (film) exposures, the
Digital
mode indicator (6) must
not
be illuminated.
You can switch back and forth between the conventional
and digital radiographic technique by briefly holding
down the time selector (5). The
Digital
mode indicator
(6) then switches off.
The exposure time for conventional exposures is then
displayed.
5
6
5
6
