62 07 687 D3530
20
D3530
.
201.01.06
.
02 07.2011
4 Operation
Sirona Dental Systems GmbH
4.2 Operating the LEDview via the proximity switch
Operating Instructions LEDview / LEDview S
4.2
Operating the LEDview via the proximity switch
Operating the LEDview via the proximity switch
Operating lights which cannot be controlled and whose brightness cannot
be adjusted via the user interface of a treatment center (ceiling model,
ceiling combination, C8
+
unit model) must be operated via a proximity
switch.
This method of operation optimally supports hygiene for all versions,
especially in connection with sterile treatment work.
The switch is attached to the bottom of the LEDview's lamp.
LED Operation via proximity switch, worldwide
Switching the operating light to the normal mode
✔
The operating light is switched off.
✔
Or: It is in operation with the composite function.
➢ Move your hand past and underneath the proximity switch.
The LEDview is turned on in or switches to the normal operating
mode.
The LED of the
Operating light fixed key on the dentist and
assistant elements lights up (LED not present on C8
+
).
Composite
Switching the operating light to the composite function
✔
The operating light is switched off.
✔
Or: It is switched on in the normal mode.
➢ Hold your hand underneath the proximity switch for at least 1 s.
The operating light is switched on with the composite function or
switches to the composite function.
The LED of the
Operating light fixed key on the dentist and
assistant elements lights up (LED not present on C8
+
).
> 1s
> 1s