64 95 142 D3632
210
D3632
.
031.01.02
.
02 03.2016
13 Unit adjustment and calibration
Sirona Dental Systems GmbH
13.1 General information on unit adjustment and calibration
Installation Manual ORTHOPHOS SL
13.1.6
Test phantom for adjustment and calibration
13.1.6.1
Needle phantom for panoramic adjustment
For
"Sensor adjustment"
and
"Symmetrie adjustment"
panorama
adjustments, the needle phantom (A) must be inserted into the pan bite
block holder of the unit. For
"Diaphragm adjustment"
panorama
adjustment, the needle phantom must be taken out of the bite block
holder.
NOTICE
Risk of damage to unit
Make absolutely sure that the needle phantom is inserted into the bite
block holder of the unit in such a way that the front needle (B) of the
phantom points
away from the unit in the direction of the patient
(see
figure). Otherwise, this can result in a collision between the sensor and
the needle phantom and thereby damage the unit.
A
B
Summary of Contents for ORTHOPHOS SL 2D
Page 2: ......
