61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
128
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Configuration of the treatment center (setup)
4.13.4.8
Linking the tumbler heater to the chair program
A setting can be made so that the tumbler heater automatically switches off
when the entry/exit position (0) chair program is activated. The tumbler heater
switches back on as soon as the patient chair leaves the entry/exit position.
This makes it possible for the patient to drink cold water during waiting periods
and to save energy.
z
Field 1: The tumbler heater is switched off in the chair program entry/exit
position (0).
z
Field 2: The tumbler heater remains switched on in every chair program.
Chair programs 3 and 4 are not displayed on the touchscreen to save space.
¾
Touch the
Tumbler heater
key.
ª
The selected field is highlighted orange.
4.13.4.9
Linking the dentist element movement to chair
programs
A setting can be made to designate the chair programs for which the position
of the dentist element can be additionally programmed.
z
Field 1: The position of the dentist element is not added to any chair
program.
z
Field 2: The position of the dentist element is not added to any chair
program except for the mouth rinsing position (S).
z
Field 3: The position of the dentist element is added to every chair
program.
Chair programs 3 and 4 are not displayed on the touchscreen to save space.
¾
Touch the
Dentist element position
key.
ª
The selected field is highlighted orange.
¾
Change to the next setup program page.
4.13.4.10
Linking the spray aspirator to the 4-way foot
switch
A setting can be made to enable interruption and/or reactivation of the suction
flow of the spray aspirator by pressing the 4-way foot switch on the base of
the chair in any direction. This function cannot be used on the saliva ejector
or on the surgical suction device. Also observe the safety information, see
"Suction handpieces" [
