61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
38
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Foot control
4.3.3
Using the cursor control
4.3.3.1
Functionality
Cursor control as an alternative mode of operation
The touchscreen and the fixed keys of the dentist element can also be
operated hand-free via the foot control. This method of operation optimally
supports hygiene, especially in connection with sterile treatment work.
For cursor control, the foot control features a 4-way foot switch plate that can
be moved in four directions.
The cursor position is optically displayed on the touchscreen or on the fixed
keys.
The cursor control is reserved for the Start and Instrument programs. The
SIVISION programs cannot be controlled via the cursor.
Cursor control setting options
Note that different settings can be made for the cursor control in the Setup
program. The functions assigned to the 4-way foot switch plate vary
according to its setting. The adjacent symbols for setting the cursor are used
in the Setup program.
z
Cursor control switched off:
The dentist element moves away from the user when the 4-way foot
switch plate is pressed upward. Counterclockwise or clockwise motor
rotation can be selected by sliding the 4-way foot switch plate to the left or
right.
z
Cursor control switched on, without program change:
The cursor can be moved along the cursor path by holding or repeating
upward or downward actuation of the 4-way foot switch plate.
z
Cursor control switched on, with program change:
The cursor can be moved along the cursor path by holding or repeating
upward or downward actuation of the 4-way foot switch plate. If the cursor
is located at the end of the cursor path, it can be toggled between the Start
program and the Instrument program.
Please also note the information on "orange and blue bars," see below.
To set the cursor control to the mode you prefer, refer to "Setting the cursor
control" [
Current cursor position
If the cursor control is activated, the current position of the cursor is displayed
by an orange bar located between the pairs of keys on the touchscreen or
between the fixed keys on the EasyTouch control panel.
S
0
