61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
86
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Dentist element
The
Treatment Selection
screen indicates which burr drive is assigned to the
treatment type and which one could be used alternatively:
z
Empty, gray circle
Instrument cannot be used for the selected treatment type
z
Solid gray circle
Burr drive can be assigned to the selected treatment type
z
Solid orange circle
Burr drive is assigned to the selected treatment type
If you would like to use a different burr drive for the selected treatment, you
can change this setting.
9
The
Treatment selection
screen is displayed on the touchscreen.
1.
Before selecting the treatment, touch the left-hand or right-hand
Assign
burr drive
key.
Left-hand key: endodontic treatments
Right key: implantological treatments
ª
The
Assign burr drive
display appears.
2.
Remove the burr drive you would like to use for the treatment type from
its holder.
ª
The
Assign burr drive
display automatically disappears. The selected
burr drive is marked by an orange circle in the
Treatment selection
screen.
Switching the Treatment function off
If the Treatment function is activated, the
Implantology program
or the
Endodontics program
will be displayed on the touchscreen instead of the
Motor screen
when the burr drive assigned to the selected treatment is
removed from its holder. In order for the
Motor screen
to be displayed again
the next time the burr drive is removed, the Treatment function must be
switched off beforehand.
¾
Touch the
Treatment
key again.
ª
If the key is highlighted blue, the Treatment function is deactivated.
The
Motor screen
opens when the burr drives are removed.
4.5.14.2
Implantology
4.5.14.2.1
Setting the gear reduction of the contra-angle
handpiece
9
The
Implantology program
is displayed on the touchscreen.
