61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
96
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Dentist element
2.
Touch the
Sub-screen
key again.
ª
The
Endodontics
sub-screen is displayed.
For endodontic treatments, the settings are made individually for each file.
1.
Use the
↑
and
↓
keys to select the file for which you would like to change
the settings.
ª
The selected file is highlighted orange.
2.
Perform the settings as described in the following sections. Confirm your
settings with the
Memory
key.
ª
The settings you have made will be saved for the selected file.
Setting the gear reduction of the contra-angle handpiece
Setting the gear reduction of the contra-angle handpiece
The
Contra-angle handpie
ce
key is used to set the reduction ratio. The only
available reduction rate at the moment is 6:1.
Switching the auto reverse function on/off
A setting can be made so that the burr drive automatically switches to
counterclockwise rotation when the preset torque value is reached. If the foot
pedal is pressed again, the burr drive switches back to clockwise rotation.
¾
Touch the
AutoRev
key.
ª
If the key is highlighted orange, the auto-reverse function is activated.
Switching the torque signal on/off
Switching the torque signal on/off
This can be used to set the acoustic signal that sounds whenever 75% of the
currently set torque value is exceeded.
¾
Touch the
Acoustic Signal
key.
ª
If the key is highlighted orange, the torque acoustic signal is
activated.
Remove file from sequence
Remove file from sequence
Individual files can be removed from the sequence.
NOTE:
Memor
y key hidden
Please note that the factory-preset endodontics treatment settings cannot be
changed. The
Memory
key is therefore hidden in the sub-screen for these
treatments.
In order to change the settings of a factory-preset endodontic treatment
despite this restriction, the treatment must be copied first; see "Copying an
existing endodontic treatment" [
98]
.
