61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
124
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Configuration of the treatment center (setup)
¾
Press and hold the
Setup
fixed key (> 2 s).
ª
Six setup programs are offered for selection.
Key symbols of the six setup programs line by line from left to right:
z
EasyTouch user interface
z
Date and time
z
Control options
z
Instruments
z
Network connection
z
Service domain (for service engineers only)
¾
Touch the corresponding key to open the setup programs.
Some of the setup programs comprise several pages. Navigation can then be
performed via the
Scroll forward/back
keys.
All of the settings you have made will be accepted when you leave the setup
program.
4.13.2
Configuring the EasyTouch user interface
¾
Touch the
EasyTouch user interfa
ce
key in the setup program.
ª
The sub-screen opens.
4.13.2.1
Switching the key tone on/off
A setting can be made to activate or deactivate an acoustic signal that sounds
when the operator touches a key on the touchscreen.
¾
Touch the
Key tone
key.
ª
If the key is highlighted orange, the key tone is activated.
4.13.2.2
Calibrating the touchscreen
If the touchscreen is no longer able to precisely locate the position of a
contact, it must be recalibrated.
1.
Touch the
Touchscreen
key.
ª
A calibration field is displayed.
NOTE:
The setup program closes automatically if no key is activated in 25 seconds.
