61 93 556 D3509
35
D3509
.
201.01.02
.
02
19.09.2008
4 Operation
Sirona Dental Systems GmbH
Foot control
Operating Instructions TENEO
Status messages are displayed to indicate e.g. failure to communicate with
the external PC, the need to change the amalgam separator or add
disinfectant, the need to charge the battery of the wireless foot control, error
messages, or the number of days left until the next maintenance call or
sanitation run.
If the treatment function is switched on, the selected treatment and the
assigned burr drive are also displayed here.
Sub-screens
Some programs are divided into a main program and sub-screens.
The function keys for the basic functions are displayed in the main programs.
The
Sub-screen
key (two rectangles) leads to further setting possibilities.
Sub-screens are automatically hidden after a certain period has elapsed. The
Return
key (return arrow) closes the opened sub-screen immediately.
Settings screens
In many cases, functions not only can be switched on or off, but also can be
set. If a function key is pressed and held (> 2 s), the corresponding settings
screen appears. This screen is superimposed onto the one lying below it. The
screen located in the background has a semitransparent appearance and is
temporarily disabled for inputs.
Settings screens are automatically hidden after a certain period has elapsed.
The
Return
key (return arrow) closes the opened settings screen
immediately.
Key background colors
General functions are represented by gray keys. If the corresponding function
is switched on or active, the key is displayed orange.
Keys that initiate a program change or lead to sub-screens and settings
screens are displayed blue.
As long as a key remains activated, its active state is marked by a bold black
border.
4.3
Foot control
The treatment center can be operated using a wireless foot control or a foot
control with a cable connection.
4.3.1
Wireless foot control
Technical data of the wireless module, see Foot control radio interface" [
.
