61 93 556 D3509
D3509
.
201.01.02
.
02
19.09.2008
50
Sirona Dental Systems GmbH
4 Operation
Operating Instructions TENEO
Patient chair
Cuspidor bowl moves to starting position
4.4.8.1
Moving the patient chair to the entry/exit position
The following functions are triggered for simple patient entry and exit in the
entry/exit position:
z
The patient chair moves to an upright position
z
The dentist element moves to the foot end
z
The operating light switches off
z
The cuspidor bowl swivels out
The tumbler heater can be set so that it automatically switches off when the
entry/exit position (0) chair program is activated; see "Linking the tumbler
heater to the entry/exit position" [
.
Entry/exit position
Via touchscreen
9
The
Start program
is displayed on the touchscreen.
¾
Touch the
0
key briefly (< 2 s).
Via foot control
9
All instruments are in place.
¾
Press the right button of the foot control.
Via the assistant element
¾
Press the
0
key on the assistant element briefly (< 2 s).
4.4.8.2
Moving the patient chair to the mouth rinsing
position
The following functions are triggered in the mouth rinsing position:
z
The operating light switches off
z
The chair moves the patient to an upright position
NOTE: The cuspidor bowl automatically swivels back to its starting
position
The cuspidor bowl automatically returns beforehand to ensure that the patient
does not collide with it during chair movements. This return travel is
dependent on the chair movement and is executed only if a collision hazard
exists.
WARNING: The patient's feet may get caught in the instrument
hoses of the dentist element when he enters or leaves the patient chair.
The patient may trip or fall.
¾
Turn the dentist element outward before the patient enters or leaves it.
S
0
0
