61 93 556 D3509
59
D3509
.
201.01.02
.
02
19.09.2008
4 Operation
Sirona Dental Systems GmbH
Dentist element
Operating Instructions TENEO
3.
Optionally: You can switch the time loop and/or acoustic signal on/off
while the timer is counting down. Touch the
Time Loop
and/or the
Acoustic Signal
key.
ª
If a function is switched on, the corresponding key is highlighted
orange.
Stopping/resetting the timer
When the
Timer function
screen is deactivated, the timer can also be stopped
by pressing the
Timer
fixed key. If the screen is activated, the timer will be
reset to zero.
4.5.4.3
Shock positioning
Immediately moves the patient chair to a position for shock positioning of the
patient.
To program the position of the shock positioning function, see "Creating chair
programs and shock positioning" [
4.5.4.4
Operating light
Operating light
The light intensity of the operating light is > 24,000 lux.
Switching the operating light on/off
The operating light is always switched on at the set brightness level, see
"Adjusting the brightness" (below).
¾
Press the
Operating Light
fixed key.
ª
If the operating light is switched on, the LED of the fixed key lights up
on the dentist and assistant elements.
Adjusting the brightness
The brightness of the operating light can be adjusted on the touchscreen of
the treatment center.
1.
Press and hold the
Operating Light
fixed key on the dentist element
(> 2 s).
ª
The Brightness settings screen is displayed on the touchscreen.
2.
Use the – and + keys to adjust the brightness of the operating light.
4.5.4.5
Composite function
Description of composite function
With the composite function, the operating light can be operated at a reduced
brightness of < 8,000 lux.
