61 93 556 D3509
61
D3509
.
201.01.02
.
02
19.09.2008
4 Operation
Sirona Dental Systems GmbH
Dentist element
Operating Instructions TENEO
Setting the water tempering
1.
Switch the tumbler tempering function on/off. Touch the
Water Temperi
ng
key.
ª
If the key is highlighted orange, the tumbler tempering function is
activated. The water tempering keys are displayed.
2.
Use the – and + keys to set the water temperature.
4.5.4.7
Flushing of the cuspidor bowl
The flushing function is used for coarse cleaning of the cuspidor bowl during
treatment.
Switching the flushing on/off
¾
Press the
Flushing
fixed key.
ª
The LED in the key lights up during the flushing function. The flushing
function is activated for the preset flushing time.
Setting the flushing time
1.
Press and hold the
Flushing
key on the dentist element (> 2 s).
ª
The
Flushing
settings screen appears on the touchscreen.
2.
Set the flushing time with the + and – keys.
Link flushing to mouth rinsing position S
¾
Touch the
Link flushing to mouth rinsing position S
key.
ª
If the key is marked orange, flushing is automatically activated for the
duration of the flushing time set when approaching the mouth rinsing
position S.
4.5.4.8
Freely selectable function
Bell
e.g. call key
Freely available relay 230 V, 6 A
(connected by service engineer).
This function can be preset as a pushbutton or as a switch in the Setup
program, see "Setting the bell/hash key as a pushbutton or as a switch" [
.
Hash
Freely available relay 230 V, 6 A
(connected by service engineer).
This function can be preset as a pushbutton or as a switch in the Setup
program, see "Setting the bell/hash key as a pushbutton or as a switch" [
.
