SIS Ergo Elle Series, Manual

4xB

A

A

1

1

2

3

3

*** For technical support please call 1.800.374.7438 #2007, servicetech@sisergo.com ***

Page: 1 of 5

Elle Series

4-Leg Electric

Components Required:

1. Leg upright x2

2. Adjustable Crossbar x1 (3 Pieces)

3. L Brackets x2

4. Control box x1

5. Control switch x1

6. 120v Power Cord x1

7. Network Cable x4

8. Cable tray x1 (Optional)

9. Hardware Bag x1

10. Battery Pack x1 (Optional)

11. DC Cable with 2-pole minift plug x1 (Optional)

12. Hook & Loop (150mm)  x2

13. Hook & Loop (350mm) x1

Assembly Steps:

1. Attach leg uprights(1) to ends of adjustable 

crossbar (2) and L-brackets(3) with four M8x20mm 

machine screws (B) per component.

2. Attach adjustable crossbar center(2) to 

adjustable crossbar ends with two M8x12mm 

machine screws(A).Set the spacing for the 

adjustable crossbar(2) so that the overall width of 

the frame corresponds with the overall width of the 

table top to be mounted

NOTE:

 Depending on frame model, table may not 

include optional cable managemet tray (8). If not, 

skip to step 6 on page 3.

Tools required: Drill driver, PHILLIPS bit PH2. Hex key 4mm and 5mm.

A x 2 (m8x12)

R011065 

B X 16 (m8X20)

R011009

5mm HEX WRENCH

R011905

4mm HEX WRENCH

R011921

C x 4

RM-175

4xB

4xB

4xB

C

C

C

C