1
8
1
*** For technical support please call 1.800.374.7438 #2007, servicetech@sisergo.com ***
Page: 2 of 5
Elle Series
4-Leg Electric
Optional Cable Tray Assembly:
3. Mounting Cable Tray: The cable tray (8) can be
locked into the inside frame rail of the leg uprights (1).
Extend out the machine screw locks on either end of
the cable tray (8) to insert into leg uprights (1) and
rotate to tighten and lock into place. See (FIG.1)
4. Rotate cable tray (8) so that the base of the tray is
flush with underside of leg upright (1). Utilizing threaded
knobs on either end of the tray extend locks into leg
uprights and rotate to lock cable tray (8) in place.
NOTE:
To access cable tray (8) after installation, utilize
threaded knobs to unlock and open tray.
Rotate knobs counter-clockwise and side knobs inward
to unlock and drop tray
Tools required: Hex key 4mm
FIGURE 1
