background image

MC1000e-R / T

www.siskiyou.com 

siskiyou

 1-877-313-6418

2

User’s Manual

Copyright © 2013 Siskiyou Corporation. All rights reserved. No part of this catalog may be reproduced, copied or transmitted in any form or by any 
means electronic or mechanical, including photocopying, recording, taping, or by an information storage and retrieval system, in English or in other 
languages, without written permission from the publisher.

Product Warranty

Siskiyou Corporation products carry the following warranty, 
effective for a period of one year from the original invoice date 
unless otherwise stated in the product literature:

n

  Siskiyou Corporation products will be free of defects in 

material and workmanship.

n

  Siskiyou Corporation products will meet the specifications 

stated in this catalog.

If you find any defects in material or workmanship, or a failure 
to meet specifications within the warranty period, return the 
product to us clearly marked with a Return Authorization (RA) 
number and we will either repair or replace it at our discretion. 
Call our toll free telephone number and ask for the service 
department to request RA numbers.
Our warranty excludes products that have been improperly 
installed or maintained, modified or misused. Notification of claim 
must occur within the warranty period. Siskiyou Corporation’s 
liabilities are limited as set forth in our STANDARD TERMS 
AND CONDITIONS, copies of which are available upon 
request.
Siskiyou Corporation products unused and undamaged may 
be returned to Siskiyou Corporation within 30 days of the initial 
invoice date (60 days outside of the US), but are subject to a 
25% restocking fee.

Warranty Repairs

Before shipping a part to Siskiyou Corporation, a Return 
Authorization (RA) number must be obtained by calling our ser-
vice department at our toll free telephone number. The product 
must be shipped prepaid in the original or equivalent packing 
with the RA number clearly marked on the outside of the box. 
Pack carefully to prevent damage. Place actuators, stages, 
manipulators, and controllers in a clean plastic bag to prevent 
contamination from packing materials. Siskiyou Corporation 
cannot be responsible for any damage occurring in transit to 
us. Products are not accepted without a Return Authorization 
number on the outside of the shipping carton.

Non-Warranty Repairs

If a product needs repairing after the one year warranty period 
expires, we will first provide an estimate of repair charges 
and then repair the product upon receiving authorization from 
you. Repairs are warranted for 90 days. Refer to the above 
Warranty Repairs information for return procedures. 

Service Information

Please call, email, or fax in your questions to Siskiyou 
Corporation at:

Telephone (toll free): 1-877-313-6418
E-Mail: service@siskiyou.com
Facsimile: 1-541-479-3314

For a mailing address, refer to page 11.

List of Figures

Figure 1: Interface 

4

Section 1.0 - Introduction 

3

Section 1.1 - Inspection 

3

Section 1.2 -  Performance Specifications 

3

Section 4.0 - Interface 

5

Section 3.0 - Installation 

4

Section 7.0 - Maintenance and Service 

7

Service Form 

SF9

Contact Information 

11

Section 5.0 - Operatiion 

6

Table of Contents

Section 4.1 - Junction Box 

5

Section 4.2 -  Controller 

5

Section 6.0 - Troubleshooting 

7

Related Products 

8

Section 2.0 - Description 

3

Summary of Contents for MC1000e-R













Reviews: