Flight Simulators Solutions
737
2.2
737NG CLOCK/CHRONO
User Manual
FS737NG-MAN-GAU-CT-E-18-0172
9 / 14
User Manual - 737NG Clock V3.5 - Rev2.2.docx
MAN DATE:
for setting the MAN date it is necessary to follow the next steps:
1.
The clock must be set to show the information (in the top display) corresponding to DATE MAN. To
do that correctly, press TIME/DATE until you can see that DAY, MO and YR are switched on and
TIME is switched off. MAN must also be switched on.
2.
Push the SET buttons. This step is used for putting the clock in configuration mode. Then, the hour
digits will start to blink.
3.
Modify the DAY digits with the +/- push-buttons and stop when you have the correct day UTC.
4.
After that, push SET and the MONTH digits will start to blink.
5.
Make the same operation of to adjust the digits with the +/- push-buttons.
6.
After that, push SET and the YEAR digits will start to blink.
7.
Make the same operation of to adjust the digits with the +/- push-buttons.
8.
Once this operation is finished, return to push again SET and the information of the MAN DATE will
store in the system.
