Full Manual MD-270/WL-355
- 13 -
Connect power to the MD-270/WL-355
Connect the supplied 12V 2A DC adapter to a free wall socket. Connect the other end
to the designated port on the back of the TV Media Player.
Connect USB storage to the MD-270/WL-355
Connect the USB memory device to the TV Media Player.
The TV Media Player automatically searches the disk for supported media content. If
there is a large volume of digital media, it might take several minutes to completely
scan the disk, however the files that have already been scanned can be played. Some
USB hard drives require a separate power source to use it, so make sure the USB disk
is powered on and connected. Often USB hard disks have LED indicators that let you
know if it is powered on and if it is connected. Check the user guide of the USB hard
disk for more information.