Advanced
This tab allows you to set the advanced wireless options. The options included are
Channel Bandwidth, Fragment Threshold, RTS Threshold, Beacon Interval, and Preamble
Type. You should not change these parameters unless you know what effect the changes
will have on the access point.
Fragment Threshold
Set the Fragment threshold of wireless radio. The default
value is 2346.
RTS Threshold
Set the RTS threshold of wireless radio. The default value is
2347.
Beacon Interval
Set the beacon interval of wireless radio. The default value is
100.
DTIM Period
Set the DTIM period of wireless radio. The default value is 3.
Data Rate
Set the wireless data transfer rate to a certain value. Since
most wireless devices will negotiate with each other and pick
a proper data transfer rate automatically, it’s not necessary
to change this value unless you know what will happen after
modification.
N Data Rate
Set the data rate of 802.11 N clients, available options are
MCS 0 to MCS 15. It’s safe to set this option to ‘Auto’ and it’s
not necessary to change this value unless you know what will
happen after modification.
Channel Width
Select wireless channel width (bandwidth taken by wireless
signals of this access point). It’s suggested to select ‘Auto
20/40MHz’. Do not change to ’20 MHz’ unless you know what
it is.
Preamble Type
Set the type of preamble of wireless radio. The default
setting is ‘Short Preamble’.
CTS Protect
Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g wireless access
points. It’s recommended to set this option to ‘Auto’.
Summary of Contents for WLX-7000
Page 1: ...WLX 7000 Wi Fi access point AC1200 ...
Page 4: ......
Page 5: ......
Page 21: ...Statistics Shows the counters of packets sent and received on LAN and WLAN ...
