5 Getting Started
Before beginning the installation, please read through the installation procedure
described in this manual.
5.1 Installation Requirements
To begin using the Wi-Fi Music Player, you will need:
•
An output equipped with either S/PDIF or analogue input channel.
•
Existing wireless network (802.11G / 802.11N)
5.2 Installation Procedure
The Wi-Fi Music Player installation procedure is summarized below:
1. Connect the Wi-Fi Music Player to an output source.
2. Connect the power to the Wi-Fi Music Player.
3. Connect the Wi-Fi Music Player to your existing wireless network.
5.2.1 Connect the Wi-Fi Music Player to an output source
The Wi-Fi Music Player supports digital audio over S/PDIF and analogue audio over
RCA /stereojack.
• Analogue Audio (RCA)
Connect the supplied 5V DC adapter to a free wall socket. Connect the other end
to the designated port on the back of the Wi-Fi Music Player.
Plug the supplied RCA / stereo jack cable into the analogue port and the red and
white connectors into the colour-coded Audio connectors of your stereo receiver.
Connect the red plugs to the Right (R) jacks and the white plugs to the Left (L)
jacks.
Summary of Contents for WMA-1000
Page 1: ...Wi Fi Music Player WMA 1000 Full Manual ...
Page 27: ...Addendum C Declaration of Conformity ...
Page 28: ......