9
IF LOST THE REMOTE CONTROLLERS
，
HOW CAN
WE DO
？
If you lost the remote controller,you can use the memory to erase its control
right.But it will erase all the others remote controllers
’
s control
right.therefore,after erased,All the remote controllers need study again.we
suggest if lost one remote controller,please erase the memory of all the
remote controllers,of course,if you think it is complicated,you just don
’
t do
this,the other remote controllers also can use.Please see below how to erase
the memory:
1
、
Pull out the AC adaptor
2
、
Use the screwdriver to take the system from the wall,open the crust,please
take care of the screws.
3
、
Finding out the dail switch on the main control circuitry board
（
see figure4
）
.
4
、
Dail the WORK code to
”
O
”
,study code to
”
N
”
,it will turn into the deactivated
status,meanwhile,the study light will be yellow.
5
、
Press any button on the remote controller,it beep 2 times and the study
light will be green,it indicate to erase the control right of the remote
controller.repeat again to erase the control right of all the remote controllers.
6
、
Refer to 2.2 to study all the remote controllers.
7
、
Fold the top and bottom cover,fix the system on the wall.
