13
3.3 Setup
<STOP> <5>
Setup Password is requested
You can enter the terminal’s main menu using the <STOP> button. Select the “Setup” function <5>.
The following terminal-specific functions can be carried out.
The following functions require a
password.
<STOP> <5> <1>
Configuration
The terminal calls the service centre and obtains the latest configuration parameters in the event
that they have changed.
<STOP> <5> <2>
Initialisation
You can re-initialise individual or all card providers.
<STOP> <5> <3>
SW update
The terminal calls the service host and downloads the latest software version, if one exists. The
software download may require several minutes. Please be patient and do not unplug the terminal.
<STOP> <5> <4>
Trm reset
This function is only available to the service technicians and is password-protected.
<STOP> <5> <5>
Info
The terminal ID and the current software version are displayed.
<STOP> <5> <6>
Print config
The current configuration can be printed out.
Please note that the detailed printout may require a great deal of paper.
<STOP> <5> <7>
Print error log
The error messages log can be printed out.
We recommend that you use this function only if prompted to do so by our hotline.
<STOP> <5> <8>
Print hardware info
This function is only available to service technicians and is password-protected.
<STOP> <5> <9>
System
This function is only available to the service technicians, and we recommend that you only use the
function if requested to do so by our hotline.
Summary of Contents for xenta COMPACT
Page 1: ...User guide xenta COMPACT...
