background image

17

5.2  Cashier: manual recording of the card data

Example:

Credit card

5404 3521 4589 5038

09-09

John Example

Reverse side of card

1234 567

Manual recording of the card data

Should a 

credit card

 be unreadable, the card 

data can be recorded manually. 

To do so, you need the card number, the expiry 
date, and for newer cards, the CVC/CVV (Card 
Verification  Code/Card  Verification  Value).  This 

3-digit code is printed on the reverse side of the 
card (the last three numbers).

After you have chosen the transaction mode and 
confirmed this by pressing <OK>, manual record-
ing can be activated using the corresponding 
function button.

Card number

Expiry date

CVC2/CVV2

Cashier handling

1.*

If the “foreign currency” function is activated on your terminal, you must 
select the desired currency.

* Menu appears only if two or more currencies are activated.

<Currency>

2.

Enter the amount and confirm with <OK>.
The amount must be separated with a decimal point. 
For amounts below 1, a zero “0.” must be entered first.

Amount

3.

Press the “Manual” button for manual recording.

4.

Enter the card number and press <OK>. 

Card number

5.

Enter the card expiry date and confirm with <OK>.

Expiry date

6.

Enter the CVC2 respectively CVV2 and confirm with <OK>.

Tip!

 For cards without a CVC, press <OK> 

without

 entering the CVC.

CVC2/CVV2 

if present

7.

Payment is recorded and authorised online, if this function is activated.

8.

A sales slip is printed out.
The sales slip must be signed by the customer.

 

9.

If a copy is desired   press 1. 
If no copy is desired   press 2. 
If no button is pressed, the copy will be automatically printed out after 
10 seconds.

1 : Copy

or

2 : No copy

Summary of Contents for xenta COMPACT
































Reviews: