background image

7

GSM/GPRS
Reception 
strength

Only appears if a GPRS card (optional) is installed and GPRS communication is 
 also in use.

There is a connection to the network and the reception strength is 100%.

There is a connection to the network and the reception strength is greater than 
80%.

There is a connection to the network and the reception strength is greater than 
60%.

There is a connection to the network and the reception strength is greater than 
40%.

There is a connection to the network and the reception strength is greater than 
20%.

!

  If the GSM/GPRS symbol does not appear, GSM/GPRS is not assigned to a network or reception 

is too poor to set up a connection.

The reception strength is supplemented by one of the two symbols shown below.

GSM is in use, GPRS is not available/in use.

!

  If the GSM/GPRS symbol flashes, it is in use but offline.

GSM/GPRS is in use (GPRS mode).

!

  If no supplementary symbol appears, GSM/GPRS is not available.

GSM/GPRS
Data transmission

This symbol always appears together with a communication symbol. It shows 
that a transaction is running.

This symbol appears with either the Ethernet or the WLAN symbol. It shows that 
a secure connection is active. 

Summary of Contents for xenta COMPACT
































Reviews: