EN
33
will, in case of responsibility for the non-conformity
or damage to the product, at its option, repair the
Products, replace them with new ones or refund
the purchase price of the Products. GT MEDICARE
will have no other obligation or liability towards
Reseller with respect to non-conforming or dama-
ged products other than in the previous sentence
displayed.
6.
The duration of the warranty is 60 months for the
wall cabinets, with scratches and damage to the
cabinet and window outside this provision, and
24 months for the electronics from the time of deli-
very. The producer is only obliged to fulfil the obli
-
gations arising from this warranty. The producer is
not liable for indirect or consequential damages. In
all cases, the manufacturer’s liability is limited to
the selling price of the products sold.
7.
Where a claim can be attributed to a
modification
or improper use of the product described in the
contract the guarantee is under all circumstances
not in force.
8.
The recipient will investigate all received equip-
ment immediately. The customer must inform GT
MEDICARE in writing within ten (10) days after
receipt of any defects in the consignment. If the
deficiencies
are not reported within a period of ten
(10) days, the shipment was considered complete.
For hidden, to prove by customer, defects, claims
are only possible within the warranty period. If a
complaint is justified by GT MEDICARE, then GT
MEDICARE is only obliged to replace the defec-
tive goods or repair, without the customer being
entitled to claim any compensation whatsoever.
Submitting a claim does not relieve the customer
from payment.
Product overview
What does the SixCase contain?
The SixCase contains the following parts:
•
SixCase AED Wall Cabinet
•
Key (optional)
•
24V Adapter (SC1320/ 1330/ 1340/ 1415/
1420/ 1435)
•
Feeding Cable 3m (SC1320/ 1330/ 1340/ 1415/
1420/ 1435)
•
Installation form
•
Heater (SC1320/ 1330/ 1340/ 1415/ 1420/
1435)
•
GSM Module (SMS info pack)
•
Organic plugs (4x)
•
M8 dowel screws (4x)
•
Spacer (4x)
•
Rings (4x)
•
Bolts (4x)
Installation
Important
The installation tools supplied are intended for mounting
exclusively on flat surfaces of wood, brick or concrete.
Panels must have a minimum thickness of 3mm. Always
use the supplied spacers.
Mounting on brick or concrete
Place the supplied template against the wall and mark the
holes. Drill the round 10 mm holes to a minimum depth
of 60 mm, to ensure there is sufficient depth for the plug.
We recommend drilling the upper holes at between 1.5
and 1.6 metres from the ground. The holes should always
be drilled in the middle of the brick.
Summary of Contents for SC1310
