1
78
EN
Before starting the engine
1. There must be no other people within fifteen meters of where you
are going to work.
2. Check that the work area is in a good condition and free of foreign
objects such as stones, glass or cans.
3. Inspect the entire machine for good and working condition. Make
sure all connections are tightened.
4. Always use a shoulder strap.
Starting the engine
1. Keep all other people and animals at least fifteen meters away.
2. This tool is equipped with a centrifugal clutch so that the blades start
rotating as soon as the engine is started and the throttle is set in the
appropriate position. When starting the engine, place the tool on flat
and clean ground and hold it firmly. Make sure that the throttle or blade
does not come into contact with a foreign object. Never place the
throttle in the high speed position when starting the engine.
3. After starting the engine, make sure that the blades stop completely
when the throttle trigger is turned off.
Using the product
1. Cut only materials recommended by the manufacturer.
2. Grasp the handles with both hands. Slightly spread your legs so that
your weight is evenly distributed on both legs and make sure you have
a stable stance.
3. Keep the cutting part below the level of the cutting material.
4. Keep the engine speed at the recommended value for given type of
work. Do not increase the speed unnecessarily.
5. If the machine starts to shake or vibrate, turn it off. Do not use the
machine before undergoing the necessary repair.
6. Keep all parts of your body away from moving parts and hot surfaces.
7. Never touch the muffler, spark plug or other metal components of
the engine while it is running or immediately after turning it off. Failure
to do so may result in injury or electric shock.
Summary of Contents for GRASS CUT 3.8
