FM30 User Manual V1.1
15
2020 SIYI Tech All Rights Reserved
have to repeat binding before the next flight (except when your transmitter must be
bound with a new receiver).
With OpenTX transmitter, assign unique Receiver Number at Model setup menu
per model (1 to 8), so that FM30 will match bound receiver.
Steps of Using Binding Button
*For FR Receiver
1. Power on the receiver. Press the binding button, receiver indicator turns to blink
red fast, receiver ready for binding. Under protocol mode, go to “External RF” page
in your radio transmitter and enter…
2. “Bind”. Under S.Bus/PPM mode, press the binding button on FM30 transmitter
for 5 seconds to start binding.
3. FR Receiver / FM30 Transmitter turns to blink green; communication is normal,
binding is successful.
Steps of Wireless Binding
*For FR / FR Mini Receiver
Power on the receiver. After 5 seconds, plug in and out power wire for 3 times (with
power connected for…
