Parts List
Headboard x 2
Side panel x 2
Base x 1
M3x21x57 Allen key x 2
M4x25x130 Allen key x 1
M6 x 60mm Bolt x 12
M6 X13mm Metal cross dowel x 12
M6 Double ended screw x 4
M4 Double ended screw x 4
Ø40 Wheel x 4
Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.
Warning
Safety Consideration for your Child.
·
Follow the manufacturer’ assembly instructions in detail to ensure the safety features of the cot are not compromised.
·
ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
·
DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
·
KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM
ANY POSITION IN THE COT. It is advisable to keep all items out of your child’ cot to prevent su ocation or strangulation.
·
TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR
CHILD CAN SIT UP.
Recommended Mattress Size.
·
This cot has been manufactured for use with a mattress which measures 530 mm (wide) x 1080 mm (long) x 60 mm (maximum
thickness). The width and length are speci ed because it is IMPORTANT that the gaps between the mattress and the sides and
ends of the cot do not exceed 40 mm w hen the mattress is pushed to one side or end, and 20mm when the mattress is centred.
in the cot.This is to minimise the risk of a child’ limb becoming caught in the gap.The thickness of the mattress had been spe
to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower psoition to minimise the risk of a
child climbing or falling out of the cot .
Safety Consideration for Cot.
·
Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. Regulary
check all of the connecting bolts, making sure they are tight.
·
Regularly check cot for weakness in panels joints and panels. If any weaknesses are found, report immediately to SJC Bra nds
via: www.tasmaneco.com.au
·
Do not use cot if it has been damaged in any way and always use genuine Tasman Eco parts. Contact your nearest Tasman Eco
stockist or original place of purchase for spare parts
2
