34
STEP 7
Fix the handlebars (04) at rear part of main frame (02) with
2 allen bolts (12), spring washers (11) and flat washers (09)
from lateral side and with 2 allen bolts (12), curved washers
(18) and spring washers (11) from front side.
Connect sensor wire (08) to back of computer (29).
STEP 8
Fix the bottle holder (35) at rear part of main frame (02)
with one allen screw (24), spring washer (37) and support
bracket (36). Connect the adaptor (33).
ASSEMBLY INSTRUCTIONS
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DEVICE!