36
COMPUTER OPERATION MANUAL
PULSE RECOVERY
With this special function, you can check your hearts recovery rate after a training session. This is a very
important indication for the physical condition of your body. To check your recovery rate, you need to keep
your hands onto the hand pulse-sensors after your exercise. Now press the button “RECOVERY”. The com-
puter will start to countdown 60 seconds. During this period the computer will constantly measure your
heart rate through the hand sensors. After this minute, your recovery rate will be displayed on the display.
The range is F1 to F6 (see below details). Improve your value by intense and regular training!
1.0
means OUTSTANDING
1.0 < F < 2.0
means EXCELLENT
2.0 ≤ F ≤ 2.9
means GOOD
3.0 ≤ F ≤ 3.9
means FAIR
4.0 ≤ F ≤ 5.9
means BELOW AVERAGE
6.0
means POOR
Error messages
„ERR“ means, that the contact to the handpulse sensors was not sufficiently for a measurement. The reason
for this can be, that you have not grasped the two sensors correctly. Start a new measurement with correct-
ly placed hands!
If no pulse signal can be detected, “P” is shown in PULSE window.
ERROR 1 (E1)
Connection to gear motor (motor signal) is lost for more than 4 seconds. During power-on, the gear motor
will return to initial position automatically. Contact the customer service.
ERROR 2 (E2)
Memory error. Disconnect from mains source and retry after 1 minute. If problem still exists, contact the
customer service.
ERROR 3 (E3)
Motor cannot leave zero position. Contact the customer service.
