SKATEY BALANCE SURFER, Instruction Manual

INSTRUCTIONS

9

forward.  Once the board in a horizontal position the engine will start and the board will move forward. 
It is possible to adjust the driving angle to a position you like best. For example hanging a little bit back. Now the engine 
will start before the board is in a horizontal position and the board will move forward. 
 
To change the driving angle you follow these steps:
•  Place the board on a flat surface.
•  Move the deck in the angle you like best for driving.
•  Press the front pedal with your hand to activate the sensor.
•  Press the on/off button until you hear a long beep.
•  Switch the board off.
•  When you switch on the board again the driving angle is set to your programmed position. 

4. Warnings and advice

This section contains some warnings and advice. It is important that you read and understand these warnings and advice 
in order to ensure that your experiences with the Skatey balance surfer are always positive and enjoyable. Failing to 
observe these measures may result in injuries and serious, possibly fatal wounds. BBiZZ Adventure in Sports B.V. is under 
no circumstances responsible for any damage caused by any person to himself or others.
 
The warnings and advice
•  Always check if the Skatey is in perfect working order every time you use it. Make sure that all screws are tightened  
 

and that all axle units and other mechanical- and electronic components are functioning properly.

•  Riding a Skatey is not allowed on public roads.