CHARGING AND INDICATORS
Before you start using the wristband, please
charge it for at least 1 hour.
1. Un-route the USB cable from the
charger pod.
2. Align the two metal connection points of
the charger pod with the pair on the
smart core.
3. Make the connection points approach to
each other by magnetic until they are
completed connected.
4. Plug the big end of the USB cable into
USB port of your PC.
5. Once the smart core is correctly
connected with the charger pod, the
indicator turns on.
NOTE
You can directly see the battery
icon / / , see section
Battery Status
.
GET STARTED
WEAR
Your wristband is adjustable to fit for different
wrist sizes. Wearing the band on your wrist by
following the below steps:
1. Insert the snap buttons into the
appropriate buttonholes. Do not make
the wristband too loose for avoiding
inaccurate calculations.
2. For secure, pull the wristband with some
pressure to make sure it is not easily
loosen from the wrist.
APPLICATION
Your wristband can help track your activities
during the day and your sleep status at night
while transmitting your data with your
mobile device.
Download an application from your mobile
device. For fast searching the application,
type
‘Go Walk’
as the keyword in the search
engine. It is available in Apple App Store.
is the application’s icon.
Turn on Bluetooth:
A pop-up message (see below) appears to
remind you for turning on the Bluetooth in
Settings
before start.
Indicators
Status
Action
Red is on
Charging
To keep the
smart core
charged,
connect it with
the charger
pod when not
in use.
Green is
on
Charging
completed
Remove the
charger pod
from the
smart core.
Red blinks
3 times
when
operational
button is
pressed.
Low
battery
Charge
without
interruption
until the
indicator turns
to green.
P/N: 300103418-00002-10 REV.1
3/14
