Installation
instructions for table
or bench mount
1
Choose a dry location within 2 feet
(
609,6 mm)
of a 120 V AC electrical
outlet.
2
Mount bracket directly into table or bench
(
† fig. 1
).
3
Insert reel into bracket, use care to line up
the mounting holes (
† fig. 2
).
4
Secure reel to bracket using the 8 in.
(203 mm)
pin (
† fig. 2
).
5
Once pin is fully inserted, secure 8 in.
(203 mm)
pin with cotter pin (
† fig. 2
).
6
Adjust ball stop so T-Tap or light head
hangs at your desired length.
7
Plug power cord into your 120 V AC elec-
trical outlet.
Installation
instructions for wall
mount
1
Choose a dry location within2 feet
(
609,6 mm)
of a 120 V AC electrical
outlet.
2
Take the u shaped bracket (
† fig. 1
) and
attach to wall or ceiling with the provided
screws.
Installation
instructions for ceiling
mount
1
Choose a dry location within 2 feet
(
609,6 mm)
of a 120 V AC electrical outlet
2
Screw the hanger hook securely into the
ceiling (
† fig. 3
).
Do not mount reel to drywall or any
unsupported wall material directly.
C A U T I O N
3
Insert the hanger bracket (
† fig. 2
)
inside the U bracket (
† fig. 1
) lining up
the small holes
4
Insert the locking pin through holes and
bend the end to prevent it from falling out
5
Adjust ball stop so T-Tap or light head
hangs at your desired height
6
Plug power cord into your 120 V AC elec-
trical outlet.
Do not mount reel to drywall or any
unsupported wall material directly.
C A U T I O N
3
Hang the reel on the hook (
† fig. 2
),
4
Adjust ball stop so T-Tap or light head
hangs at your desired length
5
Plug power cord into your 120 V AC elec-
trical outlet.
Fig. 1
Fig. 2
Fig. 3
2
