1
/
4
in NP
TF
1)
1
/
4
in NPTF
2)
39
40
41
42
43
44
45
46
47
48
Fig.
Line check
What to do if:
Pump loses prime
Check lubricant supply.
System fails to cycle
And calculated system planning has been
followed - Lubricant is leaking by packing of
Check or the Check. Failure of
injectors to cycle can also be caused by a
leak in supply lines. Examine supply lines
and connections.
Pump fails to operate
Check air supply.
To clean line check
83114
Remove Check and examine packing
for presence of foreign particles. If packing is
damaged, replace Check.
Remove Ball Check, Spring
and Ball Stop from Check
Retainer. Examine for presence of foreign
particles. Clean thoroughly.
)
Inlet
)
Outlet
