Run Up / Coast Down Module
Displaying Acquired Data
Speed
– Displays the machine’s current speed.
This is only applicable if a tachometer is used.
Overall
– Displays the measurement’s current overall vibration reading.
Max
– The maximum vibration amplitude and the speed at which it occurred.
Rec Time
– In an
Armed
state, shows the
Maximum Acquisition Time
setting. In an
Acquiring
state, counts down to show the remaining recording time.
When the specified
Stop Speed
or the specified
Maximum Acquisition Time
is reached,
or if the operator presses the
Stop
function button, the resulting time waveform is
recorded
as a Microsoft Windows .wav audio file
and the
Acquisition Completed
summary screen displays acquisition information.
If errors occur during data acquisition, they are noted on the
Acquisition Completed
summary screen.
Press the
OK
function button to acknowledge completion. The Microlog automatically
displays the
RUCD - Display Select
menu to provide analysis options for the recorded
data.
Displaying Acquired Data
Figure 7 - 5.
The
Display Select
Menu.
SKF Microlog - GX Series
7 - 7
User Manual
