13
SKF TKTI 10
4.2 Direct access button 2
When a picture is displayed on the screen, this button gives acces to 3 different options
with 2 settings for each (toggle using centre toggle button):
1. Camera on/off
Enable/disable the display of a digital picture blended with thermal
image.
How to set blending:
1. Press Direct access button 2 to locate the camera on/off option and
toggle the centre button to turn the camera option on.
2. Blend between the digital and thermal image by pressing the
up/down, left/right arrow buttons.
3. This will blend the two images on a percentage scale 0%, 25%, 50%
75% and 100%.
a) 100% Thermal only
b) 100% Digital only
c) 50% Thermal/50% Digital
2. Light on/off
Enable/disable high power LED in the front panel, helpful to take
pictures in a dark environment (see figure 5).
3. Auto/manual temperature range scale
Auto
Automatically adjusts the image to allow for the highest and lowest
temperature in the scene. Useful when starting an imager and
switching to different parts of a scene.
Manual
The user defines the range of temperatures to be displayed.
Manual setting is useful when the user wants to examine various
pieces of similar equipment. In a fixed temperature range, anomalies
or discrepancies can be highlighted visually very easily.
Set the span using the right and left navigation button and the level
using the up and down navigation button.
4. Play audio (only in picture viewing mode)
Plays previously recorded voice annotation saved with the image.
Summary of Contents for TKTI 10
Page 1: ...Instructions for use SKF TKTI 10...
Page 2: ......
Page 30: ...MP5357A SKF TKTI 10...
Page 31: ......
