8
SKF TKTI 10
3.2 Switching on the TKTI 10
• The TKTI 10 is switched on and off
by pressing and holding down the
power button.
• The TKTI 10 takes approximately
ten seconds to become
operational.
Figure 6. Camera on/off button
3.3 Focusing
Sharpen the image by rotating the
focus ring
Figure 7. Focusing
If the camera is not focused, the thermal image quality will be poor and temperature
measurements will not be accurate. To focus make certain that the display blending is less
than 100% visible (see chapter 4.2).
Rotating the focus ring in a clockwise direction (from user point of view) focuses the
images at shorter distances down to a minimum of 30 cm.
Rotating the lens in the opposite direction focuses the imager at longer distances up to
infinity.
Rotate the lens until the image has a sharp definition, with the sharpest contrast at object
edges.
Focused
Not focused
Figure 8. Focusing
Summary of Contents for TKTI 10
Page 1: ...Instructions for use SKF TKTI 10...
Page 2: ......
Page 30: ...MP5357A SKF TKTI 10...
Page 31: ......
