26
6) Ignition Switch
Electric Start Models Only
The lights are automatically ON whenever the engine is running.
1. OFF
2. ON
3. START
Key operated, 3-position switch. To start engine, turn key to START
position and hold. See illustration above.
CAUTION:
Do not hold key at START position more than 15 sec-
onds. A rest period should be observed between the cranking
cycles to let starter cool down. Holding key in START position
when engine has started could damage starter mechanism.
Release key immediately when engine has started. Key returns to
ON position as soon as it is released.
If engine does not start on first try, turn key back to OFF position
before restarting. To stop engine, turn key to OFF position.
NOTE:
If necessary engine may be manually started with rewind
starter.
If starter does not operate, check starting system fuse condition.
Refer to
Starting System Fuse
below.
A32H0MA
1
2
3
Mmo2000-003a.book Page 26 Thursday, May 6, 1999 9:48 AM
