11
b
Scie à carreaux
1350
INTRODUCTION
•
Cet outil est considéré comme une machine stationnaire
pour le découpage humide de carreaux (en céramique,
porcelaine, béton)
•
Il n’est pas destiné à découper d’autres matériaux
(comme le bois, le métal et le plastique)
•
Lisez et conservez ce manuel d’instruction
2
•
Cet outil n’est pas conçu pour un usage professionnel
•
Vérifiez que le conditionnement contient toutes les
pièces présentées dans le schéma
8
a
• Utilisez uniquement l’outil lorsqu’il est tout à fait
assemblé correctement
(veuillez noter que Skil ne
peut être tenue responsable de dégâts à l’outil et/ou de
blessures personnelles résultant du montage incorrect
de l’outil)
CARACTERISTIQUES TECHNIQUES
1
Dimensions maximum de la pièce (carreau) : 380 x 380 x
12 mm
Poids maximum de la pièce : 3,2 kg
Profondeur de coupe maximum (90 degrés) : 35 mm
ELEMENTS DE L’OUTIL
8
A
Calibre d'onglet
B
Bouton de verrouillage
C
Guide à refendre
D
Bouton de verrouillage du guide parallèle (2x)
E
Interrupteur marche/arrêt
F
Protège-main
G
Bras du carénage
H
Carter intérieur
J
Réservoir d’eau
K
Bouton de verrouillage du biseau (2x)
L
Rembobineur
M
Dispositif de courant différentiel mobile (PRCD)
N
Bouton TEST
P
Bouton RESET
Q
Indicateur de puissance
R
Clé
S
Lame
T
Bride
U
Écrou de lame
V
Poignée de transport
SECURITE
AVERTISSEMENTS DE SECURITE GENERAUX POUR
L’OUTIL ELECTRIQUE
-
AVERTISSEMENT Lisez tous les avertissements
de sécurité, toutes les instructions, illustrations et
caractéristiques fournies avec cet outil électrique.
Le non-respect du suivi de toutes les instructions reprises
ci-dessous peut provoquer un électrochoc, un incendie et/ou
des blessures graves.
! use the rip fence only on the right side of the table
when making a bevel cut
i
b
•
Storage/transport
-
make sure that switch E is in OFF position
-
disconnect the plug
-
wrap the cord around the cord wrap L
8
-
empty the water reservoir before transport
-
lift the tool by grasping the transport handles V
8
-
store the tool
indoors
in a dry and locked-up place, out
of reach of children
MAINTENANCE / SERVICE
•
Always clean tile saw and blade after use with a dry clean
cloth
! disconnect the plug before cleaning
•
Coating the table with automobile-type wax will keep the
surface clean and allow workpieces to slide freely
•
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-
send the tool
undismantled
together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
•
Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
ENVIRONMENT
• Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material
(only for EU countries)
-
in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
-
symbol
6
will remind you of this when the need for
disposing occurs
NOISE
•
Measured in accordance with EN 12418 the sound
pressure level of this tool is < 70 dB(A) (uncertainty K = 4
dB)
•
The noise emission level has been measured in
accordance with a standardised test given in EN 12418;
it may be used to compare one tool with another and as a
preliminary assessment of exposure to noise when using
the tool for the applications mentioned
-
using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase
the exposure level
-
the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce
the exposure level
!
protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Summary of Contents for 1350
