16
Operating (Fig . 7)
•
Position the wall-mount base on the wall.
•
Mount the wall-mount base and the tool accordingly.
•
Press and hold the power/laser button for about 2 seconds to turn
on the tool. The LCD display indicates the absolute angle between
the laser line and true level. The laser is turned on automatically.
•
Rotate the tool according to the digital angle indication on the LCD
display so that the laser line is projected in the desired direction.
NOTE: Arrows display only when the deviation (positive or
negative) is within 10 degrees of 0° and 90°. The height and
direction of the arrows on the LCD screen vary according to the
deviation of the angle relative to 0° or 90°. Follow the arrow icons to
fine tune the position of the tool to level or plumb.
Fig. 7
