Skil Masters 7314, Instructions Manual

5

GB

Orbital sander 

7314

INTRODUCTION

•  This tool is intended for dry sanding and fi nishing of 

wood, painted surfaces, plastic and fi ller

•  Read and save this instruction manual 

3

TECHNICAL SPECIFICATIONS 

1

TOOL ELEMENTS 

2

A

  Lever for changing sanding sheet

B

 Paper punch

C

 Dust canister

D

 Micro-fi lter

E

  Vacuum cleaner adapter

F

 On/off switch

G

 Ventilation slots

SAFETY

GENERAL SAFETY INSTRUCTIONS

 WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious 
injury. 

Save all warnings and instructions for future 

reference.

 The term “power tool” in the warnings refers to 

your mains-operated (corded) power tool.

1) WORK AREA SAFETY

a) 

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose 

control.

2) ELECTRICAL SAFETY

a) 

Power tool plugs must match the outlet. 
Never modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power tools.

Unmodifi ed plugs and matching outlets will reduce risk 
of electric shock.

b) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 
electric shock.

d) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

e) 

When operating a power tool outdoors, use 
an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

f) 

If operating a power tool in a damp location is 
unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk 
of electric shock.

3) PERSONAL SAFETY

a) 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. 
Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools 
may result in serious personal injury.

b) 

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 
protection used for appropriate conditions will reduce 
personal injuries.

c) 

Prevent unintentional starting. Ensure the switch is 
in the off-position before connecting to power 
source, picking up or carrying the tool.

 Carrying 

power tools with your fi nger on the switch or energising 
power tools that have the switch on invites accidents.

d) 

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal 
injury.

e) 

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power 

tool in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair, clothing and gloves away 
from moving parts.

 Loose clothes, jewellery or long 

hair can be caught in moving parts.

g) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) 

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

b) 

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c) 

Disconnect the plug from the power source before 
making any adjustments, changing accessories, or 
storing power tools.

 Such preventive safety measures 

reduce the risk of starting the power tool accidentally.