SKLZ.com
To avoid strangulation keep cords out of the reach of children
When attaching to ceilings and/or door frames ensure eyelet screw
is attached to a beam/frame to avoid drywall damage
ASSEMBLY:
STEP 1
- Attaching Speed Striker Overhead
Option 1- Attach to a fixed structure with Eyelet Screw (C):
Tightly screw the Eyelet Screw into a ceiling beam or door frame.
Remove end of the elastic cord from of the Loop Cord-Lock. Feed the
end of the cord through the Eyelet Screw and secure cord back into
the Loop Cord-Lock.
Option 2- Attach around a fixed object overhead
(tree branch, beam or bar):
Remove end of the elastic cord from the Loop Cord-Lock. Wrap the
elastic cord around the fixed object and secure cord back into the
Loop Cord-Lock.
STEP 2
- Attaching Cord Configuration to Weighted Base
Place Weighted Base (A) on floor directly below Cord Configuration (B). Screw the
Tension-Adjustment Stem into Weighted Base (A) until fully secure.
USAGE:
TENSION ADJUSTMENT
Adjust tension level by wrapping the elastic cord around
Tension-Adjustment Stem.
Note: The tighter the cord the faster the Striking Ball will return.
BALL HEIGHT ADJUSTMENT
To adjust Striking Ball height, simply squeeze the Height Adjustment
Cord-Lock and move the Height Adjustment Cord-Lock up or down
depending on preferred ball height.
Additional Balls and Cord-Locks Available at SKLZ.com
Option 1
Option 2
Summary of Contents for SPEED STRIKER
Page 1: ...SET UP INSTRUCTIONS ...
